News

It is expected that the application field will be further expanded, but it is unrealistic to completely replace the cylinders with self-priming non...

Pneumatic and electric systems are not mutually exclusive. Instead, this is just a question that asks for a different question.

The results of our study show that in horizontal reciprocating motions with short reciprocating cycles (less than 1 min), the operating energy cons...

In general, electric servo drives are more expensive than pneumatic servo drives, but they are also subject to specific requirements and occasions.

The requirements for users are low. The principle and structure of the cylinder are simple, easy to install and maintain

It is well known that, compared to electric actuators, the cylinders can operate reliably under harsh conditions

The joint surface with large cylinder deformation or serious steam leakage, using the method of grinding the joint surface

The cylinder is cast, and the cylinder is subjected to aging treatment after leaving the factory, so that the internal stress generated by the cyli...

Determine the thrust and tension on the piston rod based on the amount of force required for the job.

The cylinder is composed of a cylinder, an end cap, a piston, a piston rod and a seal. The internal structure is as shown in the figure:

Pneumatic actuators. The cylinder has two types of reciprocating linear motion and reciprocating swing (see figure).

As the name implies, the box is a box for packaging products. It can be classified according to materials such as: paper box, iron box, wooden box,...